Rate it
|
 |
| Doorking 9000-083 (1/2HP, 230V) Master |
|
The 9000 slide gate operator is designed to operate vehicle sliding gates in
a residential, commercial and industrial application. The doorking 9000 operator
has a full feature circuit board and includes 20-feet of #40 chain. Slave units
/ secondary operators are used in bi-parting (dual) gate applications and are
commanded from and powered from the master operator (slave units cannot be used
as a stand-alone device)
Max gate weight 1000 (lbs)
Max gate length 35 (ft)
| Regular Price: | $ 2,930.00 / Each |  | | Sale Price: | $ 1,611.50 / Each | | You Save: | $ 1,318.50 / Each |
|
|
|
The DKS 9000 series of slide gate operators offer convenience, reliability
and safe operation in a small, compact design. These operators are ideally used
in residential, commercial or industrial high-use applications. The steel frame
and belt drive/gear-box reduction system provide a powerful, yet extremely
quiet, slide gate operation. The 9000 uses an advanced microprocessor control
circuit with outstanding features. Designed with versatility in mind, these
operators will fit most slide gate operation requirements.
- Steel frame provides strength and quiet operation
- “T-Handle” release is easily accessible from front of operator
- Operator re-connects automatically when handle is released
- Adjustable partial open limit
- Direct driven limit nuts for precise gate control
- Auto-close timer 1-30 seconds
- Ports for plug-in open and reverse loop detectors – DKS detectors only
- Selectable loop/reverse input function; stop or reverse
- Anti-tailgating feature helps to control un-authorized traffic
- Standard normally closed stop circuit
- Gate Tracker reporting output provides operator data to DKS access control
system
- Convenience outlets for accessory transformers
- Built-in power switch and alarm reset switch
- Simple bi-parting gate interface
- Model 9000 Vehicular Slide Gate Operator
- Maximum gate width 35-ft.
- Maximum gate weight 1000 pounds* (1/2 HP) or 1500 pounds* (1 HP).
(*Assumes gate is on level ground, in good condition with properly adjusted
hardware. Other external factors may affect the performance of the
gate operator.)
- 1/2 or 1 HP continuous-duty motor
- 115, 230*, 208*, 460* VAC. (*230, 208, and 460 volt units use a
step-down power transformer to achieve 115 volt operating voltage.)
- Class I, II, III and IV applications
- Compliant with UL 325 and 991. (Note: To be compliant with UL 325 and industry
safety guidelines, additional secondary entrapment prevention devices are
required to be installed with this gate operator. Your professional
DKS system installer can provide you with more details on these devices and
on current industry safety standards.)
- Dimensions: 18.375"W x 31.675"H x 23.25"D
|
