Rate it
|
 |
| 9310-081 ( 1/2 HP, 115V / Battery Backup ) |
|
* Battery Convenience Open will open the gate upon AC power loss
The Model 9310 slide gate operator is designed to operate vehicle sliding
gates in a residential, commercial and industrial applications. The Doorking
9310 gate operator has a full feature circuit board and includes 20-feet of #40
chain
Max gate weight 800 (lbs)
Max gate length 30 (ft)
| Regular Price: | $ 2,980.00 / Each |  | | Sale Price: | $ 1,639.00 / Each | | You Save: | $ 1,341.00 / Each |
|
|
|
The Model 9310 operator is designed to operate vehicular slide gates in
residential and commercial applications. The 9310 is designed so that it
can easily be mounted in the front or rear of the gate without any costly and
time consuming field modifications. This operator is designed to be pad
mounted. The 9310 is available in 1/2 or 1 HP versions and can be
equipped with a factory installed DC Convenience Open option which will
automatically open the gate in the event of a power outage.
- Direct driven manual limits.
- Power Start circuit (1/2 HP only).
- Anti-tailgating feature.
- Gate tracker reporting output.
- Ports for plug-in loop detectors.
- DC Powered convenience open (optional).
- Two convenience outlets.
- Fail-safe release (fail-secure optional).
- Programming switches.
- Built-in reset switch.
- Built-in power On/Off switch.
1/2 HP Models
- Maximum gate length 30-feet.
- Maximum gate weight 1000 pounds*. (*Assumes gate is on level ground, in
good condition with properly adjusted hardware. If DC Convenience
Open option is installed, maximum gate weight is 800 pounds. Other
external factors may affect the performance of the gate operator.)
- 10:1 gear reduction running in a continuous oil bath.
- 1/2 HP continuous-duty motor.
- 115, 208, 230, 460 VAC*. (*208, 230 and 460 volt units use a step-down
power transformer to achieve 115 volt operating voltage.)
- Operator is shipped with chain brackets and 20-feet of #40 chain.
- Class I, II, III and IV applications.
- Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry
safety guidelines, a secondary entrapment prevention device(s) is required
to be installed with this gate operator. Your professional DKS
system installer can provide you with more details on these devices and on
current industry safety standards.)
- Dimensions: 21.5"W x 27.5"H x 16.5"D
|
